PF SOLVENT 20L P
CLEANING SOLVENT PF SOLVENT 20L P is a high flash point solvent cleaner and degreaser for cable jointing, maintenance, switchgear, network and electrical equipment. Suitable for HV, MV and LV applications, it removes greases, jelly, oils, soils, tar and bitumen residues and leaves no residue after complete evaporation.
CLEANING SOLVENT PF SOLVENT 20L P is a high flash point solvent cleaner and degreaser for cable cleaning prior to cable jointing, cable maintenance, and the cleaning and degreasing of switchgear, network equipment and electrical equipment. It removes greases, jelly, oils, soils, tar and bitumen residues.
| Product Code | P20301-20L-P-1 |
|---|---|
| Package Size | 20L |
| Dielectric Strength | Between 25kV and 39kV when tested |
Applications & Features
- Suitable for high voltage (HV), medium voltage (MV) and low voltage (LV) applications.
- Leaves no residue after complete evaporation.
- Designed to IEEE Recommendations.
- Ideal replacement for traditional, fast evaporating solvents such as Trichloroethane.
- Residue-free cleaning helps ensure no earth tracking or hot spots.
- Full resin adhesion to joint surfaces eliminates moisture ingress.
- Helps reduce installation faults, ensuring maximum cable life.
- Controlled evaporation rate reduces solvent consumption, VOC emissions and costs compared with fast evaporating cleaning solvents.
- Cleans most oils and greases, including room temperature residual fuel oil.
Material Compatibility
- Compatibility tested with most materials found in power networks.
- Excellent cable compatibility with various cable jacket materials.
- Suitable for use on PVC, MDPE, Lead, Aluminium, XLPE, EPR, Copper, Silicon, EPDM and Brass.
- No deleterious effects on semi-conductor materials or commonly used gasket materials.
- No lasting or serious impact on dielectric values of paper insulation tested.
- Did not exhibit any significant effects in testing on semi-conductor adhesion and mechanical strength or cause significant change in semi-conductor volume resistivity.
Available Formats
PF SOLVENT is available in both liquid and low lint pre-saturated wipes utilising a cloth compliant to AMS 3819C & BMS 15-5F qualification requirement. The pre-saturated wipe system eliminates the hazardous storage, transport and logistical issues of loose flammable liquids.
Approvals
- ABB POWER TECHNOLOGY
- ASTM International
- BOSTON EDISON COMPANY
- DOBLE ENGINEERING COMPANY
- ELASTIMOLD
- FLORIDA POWER CORPORATION
- GE
- GEORGIA POWER RESEARCH
- IEEE PES
- NKT CABLES
- PEPCO
- PFISTERER
- PG&E
- PIRELLI / PRYSMIAN
- SDG&E
- SÜDKABEL
- TYCO ELECTRONICS – ENERGY DIVISION
- WESTERN UNDERGROUND
