AEROGLAZE 9743A LINED GALLON – Epoxy Primer Part A

AEROGLAZE 9743A LINED GALLON is the Part A component of a two-component epoxy primer and tie-coat system. The product is supplied in a lined one-gallon metal container and must be combined with the specified AEROGLAZE 9700B curative before application.

This listing is for Part A only. Customers requiring the complete system should include both components in their quotation request.

AEROGLAZE 9743A is available within RIO Middle East’s selection of industrial and aerospace primers.

Product Details

The product colour should be confirmed from the current Technical Data Sheet or container label before being added to the specifications.

What Is AEROGLAZE 9743A Used For?

After mixing with its specified curative, the AEROGLAZE 9743 system is intended for use as an epoxy primer on suitable metal substrates. Manufacturer information also identifies applications involving aluminum and properly prepared composite surfaces.

The mixed system may also be used as a tie-coat within compatible coating processes. A tie-coat forms an intermediate layer between suitably prepared existing coatings and a subsequent compatible coating.

Surface compatibility, preparation requirements and the complete coating sequence must be verified against the applicable technical procedure.

Part A and Part B Requirements

AEROGLAZE 9743A is not a complete standalone kit. It represents the Part A component shown on this product page.

The complete two-component system requires:

• AEROGLAZE 9743A as Part A
• AEROGLAZE 9700B as the curative or Part B
• Mixing and application according to the current Technical Data Sheet

The required curative quantity should be confirmed when requesting a quotation. Mixing ratios should not be estimated from the container size or product name.

Substrate Considerations

Manufacturer information describes the mixed AEROGLAZE 9743 system for appropriately prepared:

• Aluminum surfaces
• Suitable ferrous and non-ferrous metal substrates
• Composite surfaces
• Compatible existing epoxy primers
• Compatible scuff-sanded urethane coatings when used as a tie-coat

This does not mean the product can be applied to every metal, composite or existing coating without testing. Preparation and compatibility depend on the substrate, coating condition and approved process.

Surface Preparation and Application

Correct preparation varies according to the substrate. Composite surfaces require additional preparation, while previously coated surfaces must be cleaned and prepared as specified in the applicable procedure.

Before beginning work, consult the current documentation for:

• Substrate cleaning and preparation
• Part A and Part B mixing ratio
• Induction time
• Application method
• Recommended film thickness
• Pot life
• Drying and curing conditions
• Recoat interval

Do not rely on general epoxy primer instructions, because the applicable conditions must come from the current AEROGLAZE 9743 documentation.

Chromate Information

SOCOMORE describes the AEROGLAZE 97 series as chromate-free two-component epoxy primers. The current Safety Data Sheet should still be reviewed for composition, hazards, personal protective equipment, storage and disposal requirements.

Users can check the manufacturer’s official AEROGLAZE 97 Series information or request the latest documentation through RIO Middle East.

Documentation to Request

Before purchasing or using AEROGLAZE 9743A, request the current:

• Technical Data Sheet
• Safety Data Sheet
• Application instructions
• AEROGLAZE 9700B curative information
• Relevant specification or approval documents
• Storage and shelf-life information

An approval should only be displayed when supported by a current document that identifies the exact product and applicable specification.

Explore Related Coating Products

Browse additional primer products or explore RIO Middle East’s wider range of aerospace coating products.

Customers comparing components from the same product family may also review AEROGLAZE 9741A LINED GALLON. Product selection should be based on the required specification rather than product-family similarity alone.

Request a Quote

Request AEROGLAZE 9743A LINED GALLON from RIO Middle East using product code Z/3001390. Include the required quantity, delivery destination and applicable technical specification.

State whether the enquiry is for Part A only or whether AEROGLAZE 9700B curative is also required.

Frequently Asked Questions

• Is AEROGLAZE 9743A a complete epoxy primer kit?

No. The pictured container is labeled AEROGLAZE 9743 Part A. The specified AEROGLAZE 9700B curative is required to form the complete two-component system.

• What is the package size?

AEROGLAZE 9743A is supplied on this page in a lined one-gallon container.

• What is the product code?

The RIO Middle East product code is Z/3001390.

• Which surfaces is AEROGLAZE 9743 intended for?

Manufacturer information identifies suitable metal substrates, aluminum and properly prepared composites. Suitability must be checked for the particular substrate and coating process.

• Can it be used as a tie-coat?

The mixed AEROGLAZE 9743 system is described as an epoxy primer/tie-coat. Compatibility with the existing and subsequent coatings must be verified before application.

• Is AEROGLAZE 9700B included?

The product image and title identify this item as Part A. Customers should ask RIO Middle East whether AEROGLAZE 9700B will be quoted separately.

• Where can I obtain the TDS and SDS?

The latest Technical Data Sheet, Safety Data Sheet and manufacturer documentation can be requested from RIO Middle East when submitting the RFQ.