SOCOLUB V0690 400ML 13.5OZ Aerosol – Water-Based Tyre Fitting Lubricant

SOCOLUB V0690 400ML 13.5OZ AEROSOL is a water-based tyre mounting lubricant developed for use between the tyre bead and wheel rim during mounting and dismounting operations.

Supplied as a 400ml tyre lubricant spray, the aerosol format allows the product to be applied at the required contact area as part of an established tyre-fitting procedure. SOCOLUB V0690 was formerly marketed under the BIB’UP name.

This product is intended as a dedicated tyre fitting lubricant aerosol. It should not be presented or selected as a general-purpose workshop lubricant.

Where Does SOCOLUB V0690 Fit into the Workshop Process?

The published technical documentation identifies SOCOLUB V0690 for mounting and dismounting tyres on:

• Passenger cars
• Vans
• Motorcycles

The rim and tyre bead lubricant is applied during the fitting or removal stage, before subsequent workshop operations are completed. Users should follow the tyre, wheel and equipment manufacturers’ procedures when carrying out this work.

Product Identification

• Product name: SOCOLUB V0690
• Manufacturer: SOCOMORE
• Former product name: BIB’UP
• Product code: P10690-400ML-A-1
• GTIN: 3665792003706
• Product type: Water-based tyre installation lubricant
• Packaging: 400ml / 13.5oz aerosol
• Published appearance: Clear, colourless liquid
• Published specific gravity: 1.0
• VOC information published by the manufacturer: 0 g/L
• Published drying information: Approximately 10–15 minutes under the conditions stated in the technical data sheet

Technical values and instructions can change between document revisions. Confirm the latest Technical Data Sheet and Safety Data Sheet for the supplied batch before use.

What Does This Product Not Replace?

SOCOLUB V0690 is a tyre mounting and dismounting lubricant. It is not described as a replacement for:

• Tyre bead sealer
• Puncture repair material
• Wheel corrosion treatment
• General-purpose grease
• Penetrating lubricant
• Tyre cleaning or dressing products

Keeping these product functions separate helps users select the appropriate material for each workshop operation.

What Should Be Checked Before Selection?

Before ordering the SOCOLUB V0690 tyre lubricant, confirm:

1. The required pack size is the 400ml aerosol.
2. The product code is P10690-400ML-A-1.
3. The intended operation is tyre mounting or dismounting.
4. The tyre, rim finish and workshop procedure are compatible with the current manufacturer documentation.
5. The latest TDS and SDS have been reviewed by the responsible technical or safety team.

Browse additional lubrication products or view the wider surface preparation range available from RIO Middle East.

For manufacturer-issued product information, visit the official SOCOMORE SOCOLUB V0690 page.

Frequently Asked Questions

• What is SOCOLUB V0690 used for?

SOCOLUB V0690 is used as a lubricant between the tyre bead and wheel rim during tyre mounting and dismounting procedures.

• Is SOCOLUB V0690 water based?

Yes. SOCOMORE identifies SOCOLUB V0690 as a water-based tyre fitting lubricant.

• Which vehicles is it intended for?

The published technical documentation refers to tyres for passenger cars, vans and motorcycles. Application suitability should still be checked against the current TDS and the tyre and wheel manufacturers’ requirements.

• Is SOCOLUB V0690 the same product as BIB’UP?

SOCOMORE states that SOCOLUB V0690 was formerly sold under the BIB’UP name. Always use the current product code and documentation when ordering.

• Can it be used as a general-purpose lubricant?

The documented application is tyre mounting and dismounting. It should not be described as an all-purpose lubricant unless a separate manufacturer document confirms another use.

• Does SOCOLUB V0690 replace tyre bead sealer?

No. A mounting lubricant and a tyre bead sealer perform different functions. Use the product specified for the actual workshop requirement.

• Where can I request SOCOLUB V0690 in the UAE?

You can submit a quotation or availability request to RIO Middle East using product code P10690-400ML-A-1.