SOCOPAC 65 H 500ML AEROSOL HFO Corrosion Inhibitor

SOCOPAC 65 H 500ML AEROSOL HFO is intended for maintenance situations where residual moisture and corrosion exposure both need to be considered.

Rather than functioning only as a surface barrier, SOCOPAC 65H is described by SOCOMORE as displacing water before leaving a corrosion-inhibiting coating. This makes the product relevant to professional processes where moisture may remain on or around specified metallic parts.

The 500 mL aerosol provides a practical format for targeted work on components, assemblies and areas where controlled spray access is required. Any application must follow the latest product documentation and the procedure approved for the relevant equipment.

Where SOCOPAC 65H Fits into Maintenance Work

SOCOPAC 65H may be considered when the documented maintenance process calls for a product that combines water displacement with subsequent surface protection.

Potential professional uses include:

• Treatment of specified aircraft components and assemblies.
• Maintenance work involving surfaces affected by moisture or condensation.
• Corrosion-control procedures for painted and unpainted metals.
• Targeted treatment of recessed or difficult-to-access locations.
• Protection of spare parts during handling or storage.
• Aerospace MRO processes requiring an aerosol corrosion inhibitor.

These examples do not replace an approved maintenance procedure. The component material, existing finish, access conditions and applicable specification should be checked before use.

SOCOPAC 65H is available within RIO Middle East’s range of anticorrosion protection products.

Two Functions in One Product

The distinguishing feature of SOCOPAC 65H is the combination of two related functions.

Water Displacement

The product is intended to move water away from a specified treated surface. This function may be relevant where moisture could interfere with the required corrosion-control process.

Protective Coating

After application, manufacturer information describes SOCOPAC 65H as leaving a homogeneous coating without runs. The resulting dry film is intended to provide continuing water repellence and corrosion protection.

The final result depends on the condition of the surface, coverage, drying requirements and correct application. These requirements must be obtained from the current Technical Data Sheet.

Materials Referenced by the Manufacturer

Available product information references the use of SOCOPAC 65H on painted and unpainted metals such as:

• Aluminium and aluminium alloys.
• Steel.
• Copper.
• Titanium.
• Cadmium.
• Magnesium.

The presence of a material in this list should not be treated as automatic approval for every component or finish. Compatibility may vary according to the alloy, coating system and applicable aerospace specification.

For broader product selection, view RIO Middle East’s aerospace surface protection solutions.

Main Product Information

Why the 500 mL Aerosol Format May Be Selected

The aerosol format is intended for requirements where direct and targeted product delivery is more appropriate than using a larger container.

It may be considered for:

• Smaller maintenance requirements.
• Localised treatment.
• Component-level work.
• Areas that are difficult to reach using conventional spray equipment.
• Situations where a portable package is required.

SOCOMORE also references an aerosol extender for accessing cavities. The suitability of this accessory and the required application technique should be verified before use.

For larger-volume requirements, RIO Middle East also lists:

• SOCOPAC 65 H 1L Metal Bottle
• SOCOPAC 65 H 5L Metal Pail
• SOCOPAC 65 H 20L Metal Pail

Package choice should reflect the treatment area, application equipment, quantity and storage conditions.

Choosing Between SOCOPAC 65H and SOCOPAC 50S

The two products address related requirements, but their functions are not identical.

SOCOPAC 65H is intended to combine water displacement and corrosion protection in one treatment. SOCOPAC 50S 500ML Aerosol HFO is described as a temporary corrosion inhibitor that produces a medium-hard, wax-like film for longer-term protection requirements.

The choice should be based on whether water displacement is required, the desired film characteristics, exposure conditions and the relevant technical specification.

Approval and Specification Checks

Available product information references several aerospace, rail and industrial organizations and standards. However, listing an organization’s name does not mean that the product is approved for every aircraft, component or application connected with that organization.

Before ordering, confirm:

• The complete approval or specification number.
• The applicable revision.
• Whether it covers the 500 mL aerosol format.
• The intended component and substrate.
• The required application procedure.
• Any inspection or removal requirements.

This approach provides more reliable information than relying on a general approvals list alone.

Manufacturer Documentation

The latest TDS and SDS should be reviewed before SOCOPAC 65H is handled or applied. These documents provide the authoritative information for preparation, application, drying, storage, safety and removal.

Product information can be checked through the official SOCOMORE SOCOPAC 65H page.

To request documents from RIO Middle East, include product code P19176-500ML-A-5 in the enquiry.

Request SOCOPAC 65H from RIO Middle East

SOCOPAC 65 H 500ML AEROSOL HFO is listed as in stock in Dubai. Current quantity, price and delivery options should be confirmed when placing an order or requesting a quotation.

For a more accurate response, provide:

• Required quantity.
• Delivery destination.
• Product code P19176-500ML-A-5.
• Required TDS or SDS.
• Applicable specification, when available.

Frequently Asked Questions

• Does SOCOPAC 65H displace water?

SOCOMORE describes SOCOPAC 65H as a water-displacing corrosion inhibiting compound. Application conditions should be verified in the latest TDS.

• Does SOCOPAC 65H provide corrosion protection after displacing water?

The manufacturer states that it leaves a protective coating intended to provide continuing water repellence and corrosion protection.

• Can SOCOPAC 65H be applied to painted metal?

Painted and unpainted metals are referenced in the available product information. Compatibility with the specific paint system must still be confirmed.

• Is the 500 mL aerosol suitable for cavities?

The aerosol format can support targeted application, and an extender is referenced for cavity access. Use of the accessory must follow the manufacturer’s instructions.

• Is SOCOPAC 65H the same as SOCOPAC 50S?

No. SOCOPAC 65H combines water displacement and corrosion protection. SOCOPAC 50S is positioned primarily as a temporary, longer-term protective film.

• What should I provide when requesting a quotation?

Provide product code P19176-500ML-A-5, required quantity, delivery destination and any applicable technical specification.