AEROGLAZE 9741A LINED GALLON Epoxy Primer Part A

AEROGLAZE 9741A LINED GALLON is the gray Part A component used to prepare the AEROGLAZE 9741 two-component epoxy primer system. It is supplied in a lined one-gallon container and requires AEROGLAZE 9700B curative before application.

The product is listed under RIO Middle East’s range of industrial and aerospace primers. Customers requesting a complete coating system should specify both Part A and the required curative in their enquiry.

Product Identification

The listed item weight should be confirmed from the container label or current manufacturer documentation before publication.

Role Within the Coating Process

When combined with its specified curative, the AEROGLAZE 9741A epoxy primer forms part of a primer system intended for properly prepared metal surfaces. Manufacturer information also identifies its use as an epoxy primer tie-coat within compatible coating systems.

A tie-coat is an intermediate coating applied between suitably prepared existing paint and a subsequent compatible coating. It should not be presented as a universal solution for every existing primer or topcoat.

Product selection must be based on the required specification, substrate, existing coating and approved maintenance or manufacturing procedure.

Substrate Information

The mixed AEROGLAZE 9741 system is described for use on appropriately prepared:

• Aluminum
• Steel
• Other suitable metal substrates
• Composite surfaces
• Compatible epoxy primer surfaces
• Compatible scuff-sanded urethane coatings

When the requirement is for an aluminum epoxy primer or an epoxy primer for metal substrates, the user should still verify the required preparation method and applicable specification.

Composite materials require additional preparation. For this reason, the product should only be described as a composite surface primer when the surface has been prepared according to the relevant technical instructions.

Chromate and VOC Information

SOCOMORE describes AEROGLAZE 9741 as a lead- and chromate-free epoxy primer. The manufacturer also lists a VOC value of 310 g/L for the mixed coating system.

These details should be read alongside the current Technical Data Sheet and Safety Data Sheet. “Chromate-free” does not mean hazard-free, and the applicable handling, ventilation, storage and personal protective equipment requirements must still be followed.

Performance Requirement Reference

The manufacturer states that AEROGLAZE 9741 meets the military performance requirements of MIL-P-23377.

This statement should not be expanded into a general military, OEM or aircraft approval. Customers working to a controlled specification should confirm:

• The exact specification and revision
• Whether AEROGLAZE 9741 is listed in their approved process
• The required substrate preparation
• The compatible topcoat system
• Any customer-specific qualification restrictions

Names of organizations should only be displayed as approvals when current supporting documentation is available.

Required System Components

AEROGLAZE 9741A is not intended to represent the complete mixed system by itself. The system requires:

• AEROGLAZE 9741 Part A
• AEROGLAZE 9700B curative
• The mixing and application conditions specified in the current TDS

AEROGLAZE 9953 is listed for use with AEROGLAZE epoxy primer processes. Its exact role in cleaning or thinning should be confirmed from the current instructions before use.

Do not substitute another curative or estimate the mixing ratio from the package sizes.

Information to Include in the RFQ

To request AEROGLAZE 9741A LINED GALLON, provide RIO Middle East with:

• Product code Z/3001389
• Required quantity
• Delivery country and location
• Applicable coating specification
• Substrate type
• Requirement for AEROGLAZE 9700B curative
• Requirement for TDS, SDS or conformity documents

Providing this information helps distinguish a request for Part A only from a request for the complete aerospace primer coating system.

Technical Documents

Consult the official SOCOMORE AEROGLAZE 9741A product information and request the current product documents before use.

The document package should include:

• Current Technical Data Sheet
• Current Safety Data Sheet
• Storage and shelf-life information
• Mixing instructions
• Application and curing conditions
• Recoat information
• Applicable conformity or approval documents

Browse Compatible Product Categories

Explore additional primer products or browse RIO Middle East’s wider range of coating products.

For another product in the same AEROGLAZE family, review AEROGLAZE 9743A LINED GALLON. The two products should not be presented as interchangeable unless the applicable specification allows the substitution.

Frequently Asked Questions

• What is AEROGLAZE 9741A LINED GALLON?

It is a one-gallon container of the gray Part A component used in the AEROGLAZE 9741 two-component epoxy primer system.

• Does the gallon include AEROGLAZE 9700B?

The product page identifies the item as AEROGLAZE 9741A. Confirm whether AEROGLAZE 9700B curative is supplied or quoted separately.

• Can AEROGLAZE 9741A be applied without Part B?

No. AEROGLAZE 9700B is the specified curative required for the two-component system.

• Is AEROGLAZE 9741 chromate-free?

SOCOMORE describes the mixed system as lead- and chromate-free. Users must still review the current SDS before handling it.

• Can it be applied to composites?

Manufacturer information includes properly prepared composite surfaces. The applicable preparation procedure and compatibility must be confirmed before application.

• Does AEROGLAZE 9741 meet MIL-P-23377?

SOCOMORE states that it meets the performance requirements of MIL-P-23377. Confirm the required revision and acceptance criteria for the specific project.

• Is AEROGLAZE 9741A the same as AEROGLAZE 9743A?

No. They are separate Part A products. Selection should follow the relevant technical specification rather than the similarity of their product names.

Request a Quote

Request AEROGLAZE 9741A LINED GALLON from RIO Middle East using product code Z/3001389. Specify whether the enquiry covers Part A only or the complete system with AEROGLAZE 9700B curative.