MICROSET 101RT BLACK 495ML – Fast-Curing Replication Compound

MICROSET 101RT BLACK 495ML is a fast-curing surface replication compound supplied for reproducing metal surface details.

The defining selection point is its short working life. Before choosing this grade, confirm that the planned application can be completed within the available time under the actual working conditions.

A larger cartridge provides a different material volume; it does not extend the working period of the mixed compound.

Product Reference

Use the complete grade, colour, volume and product code when preparing a quotation request.

Published Timing for Grade 101RT

The manufacturer lists:

• Working life: 30 seconds at 25°C.
• Cure time: 5 minutes at 25°C.

Temperature affects both timings. Higher temperatures shorten working and curing periods, while lower temperatures extend them. Manufacturer guidance also notes possible batch variation of up to ±15%.

These are reference values, not guaranteed times in every environment. Review the current instructions before planning application, removal or examination.

See the official Microset thixotropic technical information for grade-specific data.

When to Consider This Grade

Microset 101RT replicating compound is identified by the manufacturer for low-temperature conditions or applications where rapid results are required.

Its thixotropic behaviour supports vertical and overhead surface replication.

However, short working-life replication material may be unsuitable where access, positioning or application requires more time. The surface geometry and intended examination method should guide selection alongside the curing schedule.

Compare Working Time, Not Just Cartridge Size

If the application requires a longer working period, review another grade rather than assuming a different cartridge volume will change the timing.

RIO Middle East also lists MICROSET 101TH BLACK 495ML for comparison.

A change of grade should follow the inspection requirements and any applicable technical approval. The products should not be treated as interchangeable solely because they share the Microset name.

Prepare the 495ml Application System

The cartridge must be paired with suitable dispensing equipment and a compatible static mixing nozzle.

Relevant products listed by RIO Middle East include:

• Microset 495ml Manual Dispensing Gun
• Microset 495ml Pneumatic Dispensing Gun
• Microset 8mm Nozzle Pack
• Microset 10mm Nozzle Pack

Confirm the appropriate nozzle reference, cartridge connection and dispensing arrangement for the application.

The manufacturer’s Microset 495ml dispensing system overview describes the available system components.

Ask whether accessories are included in the quotation or supplied separately.

From Surface Detail to an Inspection Decision

Metal surface replication produces a replica for subsequent examination. The compound does not independently determine component acceptance or certify the absence of defects.

Before application, establish:

1. The surface feature to be reproduced.
2. The permitted preparation method.
3. The application conditions and available working time.
4. The removal and handling procedure.
5. The examination equipment.
6. The applicable acceptance criteria.

Manufacturer-listed replication resolution should not be presented as the accuracy of the complete measurement system.

Browse additional surface replication products within RIO Middle East’s non-destructive testing range.

Technical Documents and Batch Information

Consult the official SOCOMORE Microset 101RT product page and request current technical instructions and the applicable Safety Data Sheet.

Check the supplied batch’s expiry information, storage requirements and remaining shelf life. Do not assume that published shelf life equals the remaining life available on delivery.

Handling and disposal must follow the relevant safety documentation and workplace procedure.

Request MICROSET 101RT BLACK 495ML

Contact RIO Middle East with product code 104374-155, the required quantity and delivery destination.

Include any dispenser, nozzle, batch-document or inspection-specification requirements so the complete enquiry can be reviewed.

Frequently Asked Questions

• What distinguishes Microset 101RT?

It is a fast-curing thixotropic replication grade with a published working life of 30 seconds at 25°C.

• What is the published cure time?

The manufacturer lists 5 minutes at 25°C. Actual timings vary with temperature and between batches.

• Does the 495ml cartridge provide more working time?

No. Cartridge volume does not extend the mixed material’s working life.

• Is 101RT intended for vertical surfaces?

The manufacturer lists vertical and overhead applications for the thixotropic grade. Follow the current application instructions.

• Is 101RT the same as 101TH?

No. They are different grades with different working and curing schedules. Select according to the application requirements.

• Does the cartridge include a dispensing gun?

Confirm the quotation contents. The manufacturer lists cartridges and dispensing accessories separately.

• Can I use any mixing nozzle?

No. Confirm the nozzle specification and connection for the cartridge and dispensing system.

• What is the code for this configuration?

The RIO product code is 104374-155.