MICROSET 101TH BLACK 495ML – Thixotropic Replicating Compound

MICROSET 101TH BLACK 495ML is a thixotropic silicone replicating compound designed for reproducing details from metal surfaces.

Unlike a free-flowing replication material, grade 101TH is intended for applications where the compound needs to remain over the selected inspection area. The manufacturer identifies vertical surface replication and overhead surface replication among its typical uses.

The black silicone replication material is supplied in a 495ml twin-pack cartridge containing the two components used to form the replica.

Match the Grade, Colour and Cartridge

The grade and cartridge size should be checked together when ordering. A different Microset formulation or cartridge format may require different application planning or equipment.

Plan Around the Working Window

The manufacturer lists the following times for Microset 101TH replicating compound:

These are reference times, not fixed results in every environment. Higher temperatures shorten working and curing times; lower temperatures extend them. The manufacturer also notes potential variation of up to ±15% between batches.

Prepare the inspection area, cartridge, dispenser and nozzle before mixing begins. Follow the current manufacturer instructions for preparation, application and removal.

Published Material Characteristics

The Microset 101 thixotropic technical information lists:

• Replication resolution: 0.1µm.
• Shrinkage: less than 0.1%.
• Cured hardness: 28–30 Shore A.

These are manufacturer-published material characteristics. They should not be interpreted as guaranteed measurement accuracy for every surface inspection replica.

The quality and interpretation of a replica also depend on surface preparation, application, removal, examination equipment and the applicable inspection method.

Consult the official Microset thixotropic technical information for the published grade data.

Complete the 495ml Dispensing System

A compatible dispensing arrangement is required for the cartridge and its static mixing nozzle.

RIO Middle East lists:

• Microset 495ml Manual Dispensing Gun
• Microset 495ml Pneumatic Dispensing Gun
• Microset 10mm Nozzle Pack

Confirm the appropriate nozzle connection and size for the ordered cartridge. Do not assume that a dispenser designed for a 50ml or 265ml cartridge will accept the 495ml format.

The manufacturer’s 495ml system information describes the available cartridge, dispenser and nozzle options.

Ask whether accessories are included in the quotation or supplied separately.

A Replica Is an Inspection Aid

Metal surface replication provides a reproduced surface for examination. It does not independently establish that a component is acceptable or free from defects.

Before selecting this material, confirm:

1. The surface and feature to be reproduced.
2. Whether thixotropic behaviour suits the application.
3. The available application time at the actual temperature.
4. The intended examination or measurement method.
5. The component’s preparation and material restrictions.
6. The governing inspection procedure and acceptance criteria.

Browse additional replication products or explore RIO Middle East’s wider non-destructive testing range.

Documentation and Handling

Review the current product instructions and applicable Safety Data Sheet before use.

Storage conditions, remaining shelf life, handling controls and disposal requirements should be checked for the supplied batch. Do not transfer shelf-life or safety statements from another Microset grade without confirmation.

For product-level information, refer to the official SOCOMORE Microset 101TH listing.

Request the Cartridge and Accessories Together

For a quotation from RIO Middle East, specify:

• Product code: 104375-152.
• Grade: Microset 101TH.
• Colour: Black.
• Cartridge volume: 495ml.
• Required quantity.
• Manual or pneumatic dispenser requirement.
• Required mixing nozzles.
• Delivery destination.
• Required technical, safety and batch documents.

Frequently Asked Questions

• What is MICROSET 101TH BLACK 495ML?

It is a black, two-part thixotropic silicone compound supplied in a 495ml twin-pack cartridge for surface replication.

• Why choose a thixotropic replication compound?

The manufacturer identifies thixotropic grades for vertical and overhead applications where a free-flowing material may move away from the selected area.

• What is the working time of 101TH?

The published working time is 3 minutes at 25°C. Actual time changes with temperature and may vary between batches.

• How long does it take to cure?

The manufacturer lists 20 minutes at 25°C. Confirm the applicable conditions before planning removal or examination.

• Is 0.1µm a guaranteed measurement accuracy?

No. It is the published material replication resolution, not a guarantee of total measurement-system accuracy.

• Does the cartridge need a dispensing gun?

The Microset application system uses a compatible cartridge dispenser and static mixing nozzle. Confirm the accessories for the 495ml format.

• Are the dispenser and nozzles included?

Confirm the quotation contents. The manufacturer lists cartridges, dispensers and nozzle packs as separate system items.

• Is this a magnetic ink or penetrant?

No. It is a surface replication compound, not a magnetic detecting medium or dye penetrant.

• What is the product code?

The RIO listing identifies this black 495ml configuration as 104375-152.