HDL 2524 C 20L 5.3G AL PLAST PAIL – Oxide Conversion Part 2

HDL 2524 C 20L 5.3G AL PLAST PAIL is identified by SOCOMORE as Oxide Conversion Part 2 of the two-component HDL 2524 system.

The product contains liquid caustic alkali and is intended for use alongside HDL 2524 P, which contains concentrated liquid permanganate.

The complete HDL 2524 system is documented for specialized aerospace surface treatment operations involving oxides and complex metallic heat scales on jet engine components.

Unlike a general-purpose cleaning chemical, HDL 2524 C forms part of a defined industrial chemical treatment system. Its selection must be supported by the applicable technical documentation, material requirements and approved maintenance procedures.

For the complementary component, see HDL 2524 P 20L/5.3GAL PLAST PAIL.

HDL 2524 C Product Identification and Specifications

The following information identifies the specific HDL 2524 C package listed by SOCOMORE.

Product-specific characteristics, chemical classifications and applicable operating instructions should always be checked against the current manufacturer documentation.

Understanding the Role of HDL 2524 C in the Treatment System

The HDL 2524 system consists of two separately identified chemical components.

HDL 2524 C contributes the liquid caustic alkali portion, while HDL 2524 P provides the concentrated liquid permanganate component.

The manufacturer describes the complete system as part of a multi-stage process for addressing oxides and complex metallic heat scales associated with jet engine components.

This distinction is particularly important for maintenance organizations and procurement departments selecting chemicals for aerospace surface treatment.

Ordering HDL 2524 C does not provide the complete two-part system unless the required HDL 2524 P component is also obtained.

The approved process documentation determines how the components are used. Their sequence, operating conditions and handling instructions should not be inferred from a product description.

HDL 2524 C vs HDL 2524 P – Key Differences

Although both products belong to the MagChem HDL 2524 system, they have different chemical identities and ordering references.

The two components should not be treated as interchangeable materials.

Each has its own chemical identity, product code and Safety Data Sheet. Users must refer to the documentation applicable to the component being purchased.

RIO Middle East also lists HDL 2524 P 20L separately for inquiries requiring both components.

Aerospace Applications and Process Relevance

HDL 2524 C is associated with the treatment of oxides and complex metallic heat scales on jet engine components when used within the complete HDL 2524 system.

The documented application area connects the product with specialised industrial and aerospace maintenance processes, including:

• Jet engine oxide treatment
• Complex metallic heat scale treatment
• Aerospace engine surface treatment
• Jet engine component deoxidizing
• Industrial oxide conversion processes
• Specialised aerospace maintenance chemicals

These terms describe the application area of the complete HDL 2524 system rather than independent uses approved for HDL 2524 C alone.

They should not be interpreted as confirmation that the product is suitable for every jet engine component, metal, alloy or maintenance operation.

Organisations researching metallic heat scale removal or jet engine component cleaning should verify the applicable maintenance requirements and the exact chemical treatment specified for the component.

For related product options, browse RIO Middle East’s Surface Deoxidizing category or explore the broader Surface Treatment range.

Manufacturer-Published Characteristics

SOCOMORE publishes several characteristics for the HDL 2524 system.

According to the manufacturer, these include:

• Liquid formulation intended to facilitate handling.
• Oxidising action associated with complex heat-scale treatment.
• Published compatibility-related statements concerning ferrous and high-temperature alloys within the specified process.
• Manufacturer statements regarding use on high-strength or heat-resistant alloys.
• Reduced sludge formation, as described in the product information.

These are manufacturer-published characteristics of the documented product system. They should not be presented as independently verified results or universal guarantees.

In particular, claims concerning corrosion behaviour, material compatibility and treatment performance must be interpreted according to the current Technical Data Sheet and the applicable approved process.

Published Aerospace Approval References

SOCOMORE lists approval references associated with the HDL 2524 product information.

The published organizations and programs include:

• CFM International
• Engine Alliance GP7000
• GE Aerospace
• IAE / V2500
• Pratt & Whitney
• Rolls-Royce
• Safran Aircraft Engines
• Safran Helicopter Engines

The presence of these references does not establish unrestricted approval for all engines, materials or maintenance procedures associated with these organisations.

For any aerospace maintenance application, the purchaser should verify the relevant approval document, specification number, applicable revision and component requirements.

The current manufacturer record is available on the official SOCOMORE HDL 2524 C product page.

Safety, Storage and Professional Handling

HDL 2524 C is a liquid caustic alkali product intended for controlled industrial applications.

Its chemical identity means handling requirements must not be assumed to be the same as those of HDL 2524 P.

Before handling or storing HDL 2524 C, users should review:

• The latest regional Safety Data Sheet.
• Applicable chemical handling procedures.
• Required personal protective equipment.
• Workplace risk assessment documentation.
• Approved storage and segregation requirements.
• Applicable transport, spill-response and disposal regulations.

Specific hazards, first-aid requirements, incompatibilities and emergency procedures must be taken from the current HDL 2524 C Safety Data Sheet.

The material should not be promoted as harmless, universally compatible or suitable for use without appropriate industrial controls.

Technical Documents and Product Verification

Accurate documentation is important when sourcing specialist aerospace chemicals for maintenance or industrial use.

For HDL 2524 C, the principal manufacturer documents include:

Technical Data Sheet (TDS)

The HDL 2524 Technical Data Sheet provides technical information relating to the documented product system and its specified application.

Safety Data Sheet (SDS)

The HDL 2524 C Safety Data Sheet provides component-specific hazard classification and information concerning handling, storage, exposure controls and emergency procedures.

Approval Documentation

Applicable approval references should be checked against the current requirements of the relevant aircraft engine or component maintenance programme.

These documents can be accessed through the SOCOMORE HDL 2524 C manufacturer listing.

Document versions and regional regulatory requirements should be confirmed for the intended destination and use.

Requesting HDL 2524 C from RIO Middle East

RIO Middle East lists HDL 2524 C 20L as part of its aerospace and industrial chemical product range.

Customers preparing an enquiry for the HDL 2524 system should identify the exact component required and the documentation relevant to their application.

Information to Include in Your RFQ

1. Product name: HDL 2524 C.
2. Product code: P43043-20L-P-1.
3. Required quantity of 20 L packages.
4. Whether HDL 2524 P is also required.
5. Applicable engine or component reference.
6. Relevant maintenance procedure or specification.
7. Required technical and safety documents.
8. Applicable approval and revision requirements.
9. Any required batch or conformity documentation.
10. Delivery location and relevant import requirements.

Providing this information helps clarify the purchasing request and reduces the risk of confusing HDL 2524 C with HDL 2524 P.

Use the Add to Quote option on the RIO Middle East product page to submit your product enquiry.

Frequently Asked Questions

• What is HDL 2524 C used for?

HDL 2524 C is used with HDL 2524 P as part of the HDL 2524 system. The manufacturer describes the complete system for a multi-stage process assisting in the treatment of oxides and complex metallic heat scales on jet engine components.

• What does Oxide Conversion Part 2 mean?

Oxide Conversion Part 2 identifies HDL 2524 C as the second designated component of the two-part HDL 2524 product system. The designation does not replace the need to follow the approved technical process instructions.

• What is the chemical composition of HDL 2524 C?

SOCOMORE describes HDL 2524 C as consisting of liquid caustic alkali. Detailed chemical composition and hazard information should be obtained from the current Safety Data Sheet.

• Can HDL 2524 C be used without HDL 2524 P?

The manufacturer documents HDL 2524 as a two-part system that uses HDL 2524 C together with HDL 2524 P. HDL 2524 C should not be presented as a complete stand-alone oxide treatment system.

• Is HDL 2524 C the same as HDL 2524 P?

No. HDL 2524 C is the liquid caustic alkali component, while HDL 2524 P is the concentrated liquid permanganate component. They have different product codes and separate safety documentation.

• What is the product code for HDL 2524 C 20L?

The manufacturer’s product code is P43043-20L-P-1.

• What is the GTIN for HDL 2524 C?

The published GTIN is 3665792002037.

• Does HDL 2524 C come in a 20-litre package?

Yes. The manufacturer lists this specific product reference with a 20-litre package quantity, equivalent to approximately 5.3 US gallons.

• Is HDL 2524 C suitable for all jet engine alloys?

Universal compatibility should not be assumed. Material suitability depends on the complete treatment system, applicable technical instructions and approved maintenance specifications.

• Where can I find HDL 2524 C technical and safety information?

SOCOMORE provides technical and safety documentation through its official HDL 2524 C product listing. Users should consult the latest applicable document versions.

• Where can I request HDL 2524 C in the UAE?

HDL 2524 C 20L is listed by RIO Middle East Trading L.L.C. Customers can use the product enquiry option to request information concerning the specified package and their documentation requirements.