HDL 2524 P 20L 5.3GAL PLAST PAIL – Oxide Conversion Part 1

HDL 2524 P 20L 5.3GAL PLAST PAIL is the concentrated liquid permanganate component of the two-part HDL 2524 oxide conversion system.

It is identified as oxide conversion Part 1 and is used with HDL 2524 C, the liquid caustic alkali component. The manufacturer describes the complete system for use within a multi-stage process that assists in addressing oxides and complex metallic heat scales on jet engine components.

HDL 2524 P is not the complete treatment system and should not be ordered as a stand-alone replacement for HDL 2524 C.

Identify P and C Before Ordering

Both components have separate product codes, Safety Data Sheets and handling requirements. Purchasing teams should verify that the requested reference is P or C before placing an order.

The required HDL 2524 C 20L/5.3GAL plastic pail is available as a separate product enquiry.

HDL 2524 P Product Record

Published values should be checked against the current Technical Data Sheet and the documentation supplied for the ordered batch.

Position Within the Maintenance Process

The manufacturer documents HDL 2524 as part of a multi-stage process associated with jet engine component treatment.

Relevant search and procurement terminology may include:

• Jet engine component deoxidizer
• Jet engine oxide treatment
• Metallic heat scale treatment
• Aerospace engine surface treatment
• Industrial oxide conversion treatment
• MagChem HDL 2524 system

These terms describe the documented process area. They do not mean that HDL 2524 P can be used independently or on every alloy, engine part or oxide condition.

Product selection must be based on the applicable engine manual, approved process specification, component material and required approval revision.

Browse RIO Middle East’s surface deoxidizing products or explore the wider surface treatment range.

What HDL 2524 P Should Not Be Presented As

HDL 2524 P should not be described as:

• A complete one-part deoxidizing system
• A general-purpose engine cleaner
• A consumer rust remover
• A paint stripper
• A stand-alone conversion coating
• A direct substitute for HDL 2524 C
• A product suitable for every metal or alloy

The suitability of the complete process must be confirmed through the relevant technical documentation.

Published Approval References

The SOCOMORE product page lists approval or conformity references associated with organisations and engine programmes including:

• CFM International
• Engine Alliance GP7000
• GE Aerospace
• IAE / V2500
• Pratt & Whitney
• Rolls-Royce
• Safran Aircraft Engines
• Safran Helicopter Engines

These names should not be presented as universal approval for every engine, part or maintenance operation. The purchaser should specify the applicable standard, process document and revision in the RFQ.

Safety and Controlled Handling

The current European SDS classifies HDL 2524 P as an oxidising liquid that may intensify fire. It also identifies corrosivity to metals and the potential to cause severe skin burns and serious eye damage.

The product is intended for professional industrial use. Handling, storage, segregation, personal protective equipment, spill response, transport and disposal must follow:

• The current regional Safety Data Sheet
• The approved workplace procedure
• Applicable chemical and environmental regulations
• Facility-specific risk controls

Marketing phrases such as “safe,” “non-corrosive” or “harmless” should not be added to the page.

Documents to Review

Refer to the following manufacturer sources:

• Official SOCOMORE HDL 2524 P product page
• Official HDL 2524 Technical Data Sheet
• Official HDL 2524 P Safety Data Sheet

Document revisions and regional classifications should be confirmed when the quotation is requested.

RFQ Information Checklist

Include the following information with the enquiry:

1. Product name: HDL 2524 P.
2. Product code: P43230-20L-P-1.
3. Required quantity of 20-litre pails.
4. Required quantity and pack size of HDL 2524 C.
5. Engine, component or approved maintenance process.
6. Applicable specification and revision.
7. Required TDS, SDS and approval documents.
8. Required batch certificates.
9. Delivery destination.
10. Any import or regulated-transport requirements.

This information allows the exact product, packaging and documentation request to be reviewed before quotation.

Frequently Asked Questions

• What is HDL 2524 P?

HDL 2524 P is the concentrated liquid permanganate component of the two-part HDL 2524 system. It is identified as Part 1.

• Can HDL 2524 P be used alone?

HDL 2524 P is documented for use with HDL 2524 C as part of a defined multi-stage process. It should not be presented as a complete stand-alone treatment.

• What is the difference between HDL 2524 P and HDL 2524 C?

HDL 2524 P is the concentrated liquid permanganate component. HDL 2524 C is the liquid caustic alkali component. Each has a separate product code and SDS.

• What is the code for HDL 2524 P 20L?

The product code is P43230-20L-P-1.

• How much product is supplied?

The plastic pail contains 20 litres, equivalent to approximately 5.3 US gallons.

• What colour is HDL 2524 P?

The published Technical Data Sheet describes HDL 2524 P as a dark purple liquid.

• Is HDL 2524 P a general engine cleaner?

No. The manufacturer identifies it as part of a specific multi-stage oxide and heat-scale treatment process for jet engine components.

• Is HDL 2524 P suitable for every alloy?

No universal material compatibility should be assumed. The component material and approved engine-maintenance procedure must be checked before use.

• Does HDL 2524 P contain VOCs?

The SOCOMORE product listing publishes a VOC value of 0 g/L. This value should be confirmed against the current documentation required for the destination market.

• Which documents should be requested?

Request the current HDL 2524 TDS, the regional HDL 2524 P SDS, applicable approval documents and any required batch certification.