KP25 FLUO MAGNETIC INK 10L BARREL (ASME)

KP25 FLUO MAGNETIC INK 10L BARREL ASME is an oil-based fluorescent magnetic detecting medium supplied ready to use with magnetic testing benches or mobile inspection units.

This BABBCO KP25 configuration contains 10 litres and carries product code 100096D. Use must follow the approved fluorescent magnetic particle inspection procedure, including the required material, equipment and UV-A viewing conditions.

Product Code: 100096D

KP25 FLUO MAGNETIC INK 10L BARREL ASME is a ready-to-use magnetic ink supplied for magnetic testing benches and mobile inspection units.

Unlike separately supplied magnetic powders, KP25 is delivered as a prepared liquid detecting medium. The 10-litre pack is identified by product code 100096D, distinguishing it from other KP25 packaging configurations.

Match the Medium to the Inspection System

When selecting KP25 fluorescent magnetic ink, confirm that the inspection procedure calls for an oil-based fluorescent magnetic detecting medium.

The selection should address three separate requirements:

  • Component: The material must be suitable for magnetic particle testing.
  • Equipment: The inspection system must support the specified application and magnetisation technique.
  • Examination: The inspection area must meet the required UV-A and ambient-light conditions.

The detecting medium supports the examination; it does not establish acceptance criteria or replace qualified interpretation.

Product Reference

Detail Information
Product KP25 FLUO MAGNETIC INK 10L BARREL (ASME)
Product code 100096D
GTIN 3665792000781
Manufacturer BABBCO
Format Liquid
Pack volume 10 litres
Preparation Ready to use
Inspection category Fluorescent magnetic particle inspection
Manufacturer-listed NDT stage Step 4

Confirm the product reference and documentation before procurement.

Using KP25 Within a Controlled Inspection Process

Whether specified as magnetic testing bench fluid or magnetic ink for mobile inspection units, KP25 must be managed according to the applicable inspection procedure.

Controls may include:

  • Surface preparation requirements.
  • Suitable magnetisation equipment and technique.
  • Suspension condition and required verification checks.
  • Application method and timing.
  • UV-A illumination and ambient visible-light limits.
  • Indication evaluation and recording.

The complete manufacturer instructions and governing standard should determine these controls.

Prepared Liquid Does Not Mean Maintenance-Free

A ready-to-use product still requires the checks defined by the inspection system.

For bulk fluorescent magnetic ink, users should follow the approved requirements for suspension monitoring, contamination control and replacement. Any adjustment must be authorised by the current product documentation and inspection procedure.

Do not add an unspecified carrier, solvent or magnetic powder simply because it is used with another MPI product.

Technical Documentation

Review the official SOCOMORE KP25 10L product information when checking the required configuration.

The published KP25 Technical Data Sheet identifies an oil-based fluorescent medium and provides product characteristics and examination guidance.

The available TDS is dated 4 July 2017. Request confirmation of the current revision before adopting its operating values.

For handling requirements, consult the KP25 Safety Data Sheet and obtain the version applicable to the delivery market.

Standards and Purchasing Requirements

The manufacturer’s product listing includes references to AMS 2641, AMS 3045, ASME, ASTM E1444, ISO 9934, RCC-M, Dassault, Rolls-Royce and Safran.

These published references do not establish unconditional acceptance for every component or inspection programme. Include the required standard, revision and supporting certification in the quotation request.

Handling and Storage

The published SDS classifies KP25 as an aspiration hazard: ingestion followed by entry into the airways can be fatal.

Handling, exposure controls, personal protection, storage, spill management and disposal must follow the current regional SDS and workplace risk assessment. Ready-to-use should not be interpreted as hazard-free.

Explore Related Inspection Materials

Browse magnetic testing products for related materials or view the wider non-destructive testing range.

For a separately packaged fluorescent aerosol, see B101C Fluorescent Magnetic Ink 400ml. It is a different product configuration and should not be substituted without technical approval.

Request KP25 from RIO Middle East

Submit your requirement using product code 100096D. Include the required number of 10-litre containers, delivery destination, inspection specification and requested documentation.

RIO Middle East can review availability and quotation requirements for the exact reference.

Frequently Asked Questions

  • What is KP25 used for?

KP25 is a fluorescent magnetic detecting medium supplied for use with magnetic testing benches and mobile inspection units.

  • Is KP25 supplied as a concentrate?

The manufacturer identifies KP25 as ready to use. Do not assume that dilution is required.

  • Is this product an aerosol?

No. This reference is a 10-litre liquid pack.

  • Does KP25 require UV-A examination?

The published TDS specifies UV-A examination with controlled ambient visible light. Follow the current approved procedure for the required conditions.

  • Can KP25 be used to inspect any metal?

No. Magnetic particle testing requires a suitable ferromagnetic material. Confirm the component material and inspection method before selection.

  • Is KP25 the same as black magnetic ink?

No. KP25 is fluorescent. Black magnetic media support a different viewing approach and are not automatically interchangeable.

  • Does the 10L pack have the same code as the 25L pack?

No. The 10L reference is 100096D. Confirm the pack size and product code together.

  • Which documents should accompany the enquiry?

Request the current TDS, applicable regional SDS and any conformity or batch documents required by the purchasing specification.

Product Code: 100096D Categories: ,

RELATED PRODUCTS