SOCOGLAZE EPC WB 541 PA 0.9KG – Aerospace Anti-Erosion Topcoat

SOCOGLAZE EPC WB 541 PA 0.9KG is the base component of a two-part, water-based polyurethane coating system developed for aerospace applications where aircraft components are exposed to erosion.

Manufactured by SOCOMORE, the SOCOGLAZE EPC WB 541 system is designed for use on aircraft parts susceptible to sand and water erosion, with additional resistance to aviation fluids as described in the manufacturer’s technical documentation.

The product belongs to the category of aerospace anti-erosion coatings and is intended for professional coating processes involving specified substrate preparation, primers and hardeners.

SOCOGLAZE EPC WB 541 PA is supplied as a 0.9 kg liquid component. The complete two-component polyurethane coating requires the specified SOCOGLAZE HARDENER WB 541.

Customers seeking similar coating materials can explore the Erosion Protection Coating range available through RIO Middle East.

Technical Specifications

The following details identify the SOCOGLAZE EPC WB 541 PA package and the published characteristics of the complete coating system.

The shade, finish, film thickness and other application characteristics refer to the coating system described in the manufacturer’s Technical Data Sheet, not to the unmixed Part A component independently.

What Makes SOCOGLAZE EPC WB 541 Different?

SOCOGLAZE EPC WB 541 is a functional aerospace protective coating intended for a defined anti-erosion application.

Rather than being selected only for appearance, the system is specified for aircraft parts that require a coating with manufacturer-documented erosion resistance.

Sand Erosion Resistance

SOCOMORE describes the complete SOCOGLAZE EPC WB 541 system as offering excellent sand erosion resistance.

This characteristic is relevant when evaluating coatings for aircraft components exposed to abrasive environmental conditions.

Water Erosion Resistance

The manufacturer also reports good water erosion resistance.

This makes the coating system relevant to aerospace applications where water-related erosion is included in the applicable coating performance requirements.

Resistance to Aviation Fluids

SOCOGLAZE EPC WB 541 is documented as resistant to aviation fluids.

Specific exposure conditions and fluid compatibility should be verified through the applicable technical specification rather than assuming universal chemical resistance.

Water-Based Polyurethane System

The product uses a water-based polyurethane formulation and requires a separate hardener.

Its water-based chemistry should not be interpreted as meaning the product is hazard-free or suitable for use without appropriate workplace precautions.

Understanding the Two-Component Coating System

SOCOGLAZE EPC WB 541 is supplied as a two-component product system.

Part A provides the coating base, while SOCOGLAZE HARDENER WB 541 is the separately identified hardener.

The manufacturer’s Technical Data Sheet provides the appropriate mixing requirements for preparing the complete coating.

The manufacturer’s current Technical Data Sheet specifies a base-to-hardener proportion of 10:1 by weight for the documented spray application process.

The specified pot life is approximately two hours under the published process conditions.

The system must be mixed and applied according to the current TDS and applicable approved coating procedure.

For the complementary component, see SOCOGLAZE EPC WB 541 PB 0.09KG on RIO Middle East.

Suitable Substrates and Primer Requirements

The SOCOGLAZE EPC WB 541 coating system is documented for use on composite and aluminium substrates when the appropriate primer has been applied.

SOCOMORE identifies the following primer options in its technical documentation:

• PCEH 100
• PCEH 100 V2
• SOCOGLAZE PRIMER WB 411
• SOCOGLAZE PRIMER WB 413

The selected primer must be appropriate for the substrate and relevant coating specification.

Composite Aircraft Components

For composite substrates, the manufacturer specifies primer preparation before applying the SOCOGLAZE EPC WB 541 system.

Aluminium Aircraft Components

Aluminium substrates also require an appropriate primer according to the manufacturer’s published instructions.

Direct application to unprepared substrates should not be assumed acceptable.

For related primers and aerospace coating products, visit the Coatings category on RIO Middle East.

Application Requirements and Coating Preparation

SOCOGLAZE EPC WB 541 is intended for professional coating operations.

The manufacturer publishes specific process parameters for preparing and applying the complete system.

Application Environment

The Technical Data Sheet identifies the following environmental limits for the documented application process:

• Temperature: Above 15°C and below 25°C.
• Relative humidity: Above 40% and below 70%.
• Application method: Pneumatic spraying.

Mixing and Viscosity

The documented procedure requires stirring Part A before adding the hardener and mixing the components thoroughly.

The TDS specifies a mixing period of at least two minutes and includes viscosity verification before application.

DL 1511 is identified as the thinner to be used when adjustment is required, within the published limits.

Film Thickness

The manufacturer gives a recommended dry film thickness of 200 ± 20 μm for the complete coating.

The published application process uses multiple layers and defined flash-off periods between layers.

Drying

SOCOMORE also provides forced-drying instructions in the TDS, including a documented process at 80°C.

These technical parameters must be followed according to the applicable manufacturer instructions and qualified coating procedure.

They should not be treated as independent operating instructions for personnel without relevant training.

Published Coating Characteristics

For the prepared SOCOGLAZE EPC WB 541 coating system, SOCOMORE provides the following technical data.

These are manufacturer-published values for the ready-to-use system under the documented conditions.

Actual material consumption and finished-coating characteristics depend on the specified application process and substrate.

Airbus Helicopters Approval Reference

SOCOMORE lists the following conformity reference for SOCOGLAZE EPC WB 541:

Airbus Helicopters – ECS0101-4532

This reference appears in the manufacturer’s Technical Data Sheet.

Purchasers should verify that the applicable revision, product configuration and coating procedure correspond to their maintenance or manufacturing requirements.

The published reference should not be interpreted as blanket approval for every Airbus Helicopters component or aircraft model.

Refer to the official SOCOMORE SOCOGLAZE EPC WB 541 product page for current manufacturer information.

Storage, Shelf Life and Handling

Storage conditions are particularly important for two-component aerospace coating systems.

The SOCOGLAZE EPC WB 541 Technical Data Sheet provides the following storage information:

• Storage temperature for unopened original containers: 5°C to 35°C.
• Published unopened storage period: 12 months under specified conditions.
• Protect the product from frost.
• Published period after first opening for Part A: 3 months.
• Published period after first opening for Part B: 1 month.

These periods reflect the manufacturer’s documented conditions and should not replace verification of the specific batch, expiry information and current documentation.

Safety Considerations

The Safety Data Sheet for SOCOGLAZE EPC WB 541 PA identifies a skin sensitisation hazard.

Personnel should consult the applicable SDS for required protective equipment, ventilation, handling, storage and disposal information.

The hardener has separate safety documentation that must also be reviewed.

SOCOGLAZE EPC WB 541 is intended for professional industrial use.

Manufacturer Technical Documentation

Before purchasing or using SOCOGLAZE EPC WB 541 PA, customers should confirm the appropriate technical documents.

Technical Data Sheet (TDS)

The TDS provides information on the complete coating system, including mixing, application conditions, film thickness, drying, primers and technical characteristics.

View the official SOCOGLAZE EPC WB 541 Technical Data Sheet

Safety Data Sheet (SDS)

The SDS provides component-specific information concerning hazards, handling, storage and exposure controls.

View the official SOCOGLAZE EPC WB 541 PA Safety Data Sheet

Current regional document versions and applicable specifications should be reviewed before product use.

Request SOCOGLAZE EPC WB 541 PA from RIO Middle East

RIO Middle East lists SOCOGLAZE EPC WB 541 PA 0.9KG as part of its aerospace coating product range.

When preparing a purchase enquiry, it is useful to distinguish the base component from the separate hardener.

Product Enquiry Details

• Product: SOCOGLAZE EPC WB 541 PA 0.9KG
• Product Code: 101417-185
• Manufacturer: SOCOMORE
• Quantity: 0.9 kg per listed package
• Product Type: Water-based polyurethane anti-erosion topcoat base
• Complementary Component: SOCOGLAZE HARDENER WB 541
• Applicable Approval Reference: Airbus Helicopters ECS0101-4532

Customers can use the Add to Quote option on the RIO Middle East product page to request information about the required quantity, complementary materials and technical documentation.

Frequently Asked Questions

• What is SOCOGLAZE EPC WB 541 PA 0.9KG?

SOCOGLAZE EPC WB 541 PA 0.9KG is the base component of a two-component, water-based polyurethane anti-erosion coating system manufactured by SOCOMORE for aerospace applications.

• Is SOCOGLAZE EPC WB 541 an anti-erosion coating?

Yes. SOCOMORE describes the complete system as an anti-erosion topcoat for aircraft parts susceptible to erosion, including sand and water exposure.

• What is the difference between SOCOGLAZE EPC WB 541 PA and PB?

PA identifies the coating base, while the corresponding PB product supplies the hardener. The two components are used according to the manufacturer’s documented mixing instructions.

• Does SOCOGLAZE EPC WB 541 require a primer?

Yes. The manufacturer specifies primer preparation for composite and aluminium substrates and identifies several compatible primer options in the Technical Data Sheet.

• Can SOCOGLAZE EPC WB 541 be used on composite aircraft parts?

The manufacturer documents use on composite substrates with appropriate primer preparation. Suitability for an individual component must be verified against the applicable coating specification.

• Is SOCOGLAZE EPC WB 541 water-based?

Yes. The system is described as a two-component, water-based polyurethane coating.

• What is the recommended dry film thickness?

The published Technical Data Sheet specifies a recommended dry film thickness of 200 ± 20 μm for the prepared coating system.

• Is SOCOGLAZE EPC WB 541 resistant to aviation fluids?

SOCOMORE identifies aviation fluid resistance among the coating system’s characteristics. Specific compatibility and exposure requirements should be checked against the applicable technical documentation.

• What approval is listed for SOCOGLAZE EPC WB 541?

SOCOMORE lists Airbus Helicopters specification ECS0101-4532. Applicability must be verified for the relevant component and process.

• Where can I request SOCOGLAZE EPC WB 541 PA in the UAE?

SOCOGLAZE EPC WB 541 PA 0.9KG is listed by RIO Middle East Trading L.L.C. Customers can submit a quotation enquiry through its product page.