SOCOGLAZE EPC WB 541 PB 0.09KG – Anti-Erosion Coating Hardener

SOCOGLAZE EPC WB 541 PB 0.09KG is a liquid hardener supplied by SOCOMORE for use in industrial coating applications.

The product is identified as an anti-erosion hardener and is supplied in a 0.09 kg (90 g) package.

As a coating hardener, SOCOGLAZE EPC WB 541 PB is intended to function as a component of a specified coating process rather than as an independently applied protective finish.

Selecting the appropriate hardener is an important part of preparing two-component coating systems because the base, hardener and mixing instructions must correspond to the same approved formulation.

The SOCOMORE product listing identifies this reference in connection with LBYH 200, while the SOCOGLAZE EPC WB 541 Technical Data Sheet identifies a hardener named SOCOGLAZE HARDENER WB 541.

Customers should therefore confirm component compatibility using the latest manufacturer documentation before combining products.

RIO Middle East lists SOCOGLAZE EPC WB 541 PB within its Erosion Protection Coating category.

Product Specifications

The following information identifies the listed SOCOGLAZE EPC WB 541 PB package.

The product code and GTIN identify this specific package. Detailed chemical characteristics and handling requirements should be checked against the current manufacturer documentation.

Understanding the Function of a Coating Hardener

A hardener is a reactive component used in an appropriate multi-component coating formulation.

Its function depends on the coating chemistry and the manufacturer’s specified preparation requirements.

For a two-component polyurethane coating system, the correct hardener contributes to the curing reactions that form the finished coating.

However, this general function does not establish that any hardener can be used with any polyurethane base.

The specific product reference, mixing ratio and approved procedure must be confirmed before combining components.

SOCOGLAZE EPC WB 541 PB should not be treated as an interchangeable replacement for another Part B product without supporting technical documentation.

SOCOGLAZE EPC WB 541 PB and the Associated Coating System

The SOCOGLAZE EPC WB 541 product family is associated with a two-component, water-based polyurethane anti-erosion coating system.

According to the manufacturer’s Technical Data Sheet, the complete SOCOGLAZE EPC WB 541 system is intended for aircraft components susceptible to erosion.

The documented coating characteristics include resistance to sand erosion, water erosion and aviation fluids.

These are characteristics of the properly prepared coating system, not performance claims for the hardener when used independently.

Identifying Part A and Part B

RIO Middle East also lists SOCOGLAZE EPC WB 541 PA 0.9KG as a separate product.

Part A refers to the coating base, while Part B identifies the hardener component.

The correct combination must be established from the applicable manufacturer documentation.

The SOCOMORE EPC WB 541 Technical Data Sheet names SOCOGLAZE HARDENER WB 541 as its specified hardener. Meanwhile, the commercial PB 0.09KG listing refers to LBYH 200.

For that reason, purchasers should obtain confirmation of the exact component pairing before ordering or mixing these references.

Why Hardener Identification Matters

In a two-component coating process, selecting materials by package weight or similar product names alone is not sufficient.

Different coating systems may use hardeners with different chemical formulations, mixing requirements and safety classifications.

When selecting SOCOGLAZE EPC WB 541 PB, purchasers should verify:

• The full manufacturer product name.
• The hardener product code.
• The specified compatible coating base.
• The current Technical Data Sheet.
• The required mixing ratio.
• The applicable approval or coating specification.
• The product batch and documentation requirements.

These checks support accurate component identification for professional coating operations.

Mixing and Application Documentation

The SOCOGLAZE EPC WB 541 Technical Data Sheet describes preparation of its complete two-component polyurethane coating system.

For the specified system, the manufacturer documents:

Important: These values relate to the system identified in the Technical Data Sheet. They must not be used as confirmation that every commercially listed SOCOGLAZE EPC WB 541 PB package is compatible without verification of the precise hardener reference.

The preparation and application process should be carried out only according to approved technical instructions and applicable workplace safety procedures.

For other associated products, explore RIO Middle East’s Coatings collection.

Aerospace and Industrial Coating Context

Anti-erosion coating systems are used in specialised industrial and aerospace applications where the component, substrate and service environment determine the required protective finish.

The SOCOGLAZE EPC WB 541 system is documented for aircraft components exposed to erosion conditions.

Within an approved coating procedure, a compatible hardener forms part of the coating preparation process.

Potential procurement contexts for a product such as SOCOGLAZE EPC WB 541 PB include:

• Aerospace coating material sourcing.
• Industrial coating system maintenance.
• Two-component coating preparation.
• Professional coating workshop requirements.
• Replacement component procurement for approved coating systems.

These represent purchasing and process contexts rather than independent application approvals for the PB product.

Safety Considerations for SOCOGLAZE EPC WB 541 PB

The hardener has its own Safety Data Sheet and must be evaluated separately from the coating base.

The manufacturer’s Safety Data Sheet identifies hazards including flammable liquid and vapour, harmful effects if inhaled, potential skin sensitisation and respiratory irritation.

The HazCom SDS also identifies the potential for respiratory sensitisation.

Users should consult the SDS applicable to their jurisdiction and product batch before handling the material.

Professional Handling Requirements

Relevant precautions include:

• Reviewing product-specific hazard and precautionary statements.
• Following the required ventilation and exposure controls.
• Selecting suitable protective equipment according to the SDS.
• Preventing contact with incompatible materials.
• Following flammable-liquid handling and storage precautions.
• Using approved procedures for spills and waste disposal.
• Ensuring personnel are appropriately trained for the coating process.

This product should not be marketed as hazard-free simply because the associated coating system is water-based.

Storage and Shelf-Life Guidance

The SOCOGLAZE EPC WB 541 Technical Data Sheet specifies storage requirements for the coating system components.

The published information includes:

These figures should be confirmed against the current documentation applicable to the exact product reference.

Before purchasing or using the material, verify the manufacturing date, batch information, storage history and applicable expiry documentation.

Manufacturer Technical Documents

Manufacturer documentation is essential for assessing this product and determining its correct use.

Technical Data Sheet

The SOCOGLAZE EPC WB 541 TDS covers the documented polyurethane anti-erosion coating system, including its designated components and processing conditions.

View SOCOGLAZE EPC WB 541 Technical Data Sheet

Safety Data Sheet

The SOCOGLAZE EPC WB 541 PB SDS contains information on the hazards, handling, storage, exposure controls and emergency measures associated with the hardener.

View SOCOGLAZE EPC WB 541 PB Safety Data Sheet

Official Manufacturer Listing

The manufacturer listing provides the commercial reference, package quantity and available technical documentation.

View Official SOCOMORE SOCOGLAZE EPC WB 541 PB Product Page

The current applicable document revisions should always be reviewed.

Request SOCOGLAZE EPC WB 541 PB from RIO Middle East

RIO Middle East lists SOCOGLAZE EPC WB 541 PB 0.09KG among its specialist coating materials.

Customers requesting the hardener should identify the product reference clearly and include the coating system for which it is required.

RFQ Information

• Product Name: SOCOGLAZE EPC WB 541 PB 0.09KG.
• Product Code: 101194-167.
• Manufacturer: SOCOMORE.
• Required Quantity: Number of 90 g packages.
• Associated Coating Base: State the exact product reference.
• Applicable Technical Specification: Provide where available.
• Documentation Requirements: TDS, SDS and applicable conformity documents.
• Delivery Destination: Specify the required location.

Providing this information allows the enquiry to distinguish the hardener from the separately listed coating base and other similarly named materials.

Request a Quote

Use the Add to Quote option on RIO Middle East to enquire about SOCOGLAZE EPC WB 541 PB 0.09KG and the applicable manufacturer documentation.

Frequently Asked Questions

• What is SOCOGLAZE EPC WB 541 PB 0.09KG?

SOCOGLAZE EPC WB 541 PB 0.09KG is a liquid coating hardener listed by SOCOMORE for professional industrial use. It is supplied in a 90 g package under product code 101194-167.

• Is SOCOGLAZE EPC WB 541 PB a topcoat?

No. The PB product is listed as a hardener. It is not supplied as an independently usable finished topcoat.

• What is the difference between SOCOGLAZE EPC WB 541 PA and PB?

PA refers to the coating base listed separately by RIO Middle East, while PB identifies a hardener product. The exact compatibility of specific PA and PB references should be confirmed using current manufacturer documentation.

• Can SOCOGLAZE EPC WB 541 PB be used alone?

The product is identified as a coating hardener rather than a standalone protective coating. Its use depends on an appropriate, documented coating formulation.

• What is the product code for SOCOGLAZE EPC WB 541 PB?

The manufacturer product code for this 0.09 kg package is 101194-167.

• How much material does one package contain?

The manufacturer lists a quantity of 90 g, equivalent to 0.09 kg.

• What is the mixing ratio for SOCOGLAZE EPC WB 541?

The manufacturer’s TDS specifies a 10:1 base-to-hardener ratio by weight for the documented SOCOGLAZE EPC WB 541 coating system. The exact hardener reference must be verified before applying this ratio.

• Does SOCOGLAZE EPC WB 541 PB have its own Safety Data Sheet?

Yes. SOCOMORE provides product-specific safety documentation for SOCOGLAZE EPC WB 541 PB.

• How should the hardener be stored?

Storage must follow the current product documentation and applicable SDS. The coating system TDS specifies storage between 5°C and 35°C in original unopened containers and protection from frost.

• Where can I request SOCOGLAZE EPC WB 541 PB in the UAE?

RIO Middle East Trading L.L.C. lists SOCOGLAZE EPC WB 541 PB 0.09KG and provides an Add to Quote option for submitting product enquiries.